Dark Light
NAD Electronics D 3020 V2 Hybrid Digital DAC Amplifier
NAD Electronics D 3020 V2 Hybrid Digital DAC Amplifier - Image 2

NAD Electronics D 3020 V2 Hybrid Digital DAC Amplifier

Add to wishlist
Compare

$419.30

Estimated delivery on 10 August - 21 September, 2025
Compare

Items Included

  • NAD Electronics D 3020 V2 Hybrid Digital DAC Amplifier
  • Power Cord
  • Remote Control with Battery
  • 3.5mm Male to Single RCA Female Adapter
  • 4 x Dome-Shaped Feet
  • Limited 2-Year Manufacturer Warranty
Key Features
  • 2-Channel Amplifier Configuration
  • 30W per Channel RMS into 4 or 8 Ohms
  • Wireless aptX Bluetooth Input
  • 24-Bit/192kHz DAC with MQA & DSD Support
  • Digital Coaxial & Optical Inputs
  • Stereo RCA Line & MM Phono Inputs
  • 3.5mm Preamp & Subwoofer Outputs
  • Separate Headphone Amplifier
  • IR Remote Control Included
  • 12V Trigger Input

Redefining a classic for the modern era, the NAD Electronics D 3020 V2 Hybrid Digital DAC Amplifier is a compact and efficient amplifier that sounds bigger than its size and specifications would imply. Digital and analog inputs, including MM phono and wireless Bluetooth, accommodate an array of audio sources for playback. The D 3020 V2 is perfect for areas where space may be limited, like offices and bedrooms, just connect your favorite speakers and enjoy.

Reinventing an Icon
The original 3020 was well known for delivering power and quality that rivaled more expensive amplifiers and for playing well with a wide variety of loudspeakers, including low impedance models. The D 3020 V2 starts with the original NAD 3020 concept and modernizes it with the latest high-speed digital technology. The original designer of the 3020, NAD’s Director of Advanced Technology, Bjorn Erik Edvardsen, has been pivotal in developing the D 3020 for the new digital generation.
Power that Delivers
Power output may look small on paper at 30W per channel, but like all NAD amplifiers this is very misleading, as a properly designed 30W amplifier can sound superior to a 100W amplifier from a lesser brand. With its very small form factor, the D 3020 will astound many for its ability to drive difficult loudspeakers to satisfying levels without adding noise or distortion.
Well Connected
The D3020 V2 features Optical and digital coaxial inputs with a 24-bit/192 kHz DAC for digital sources, including computers, CD/DVD players, and televisions. A stereo RCA input is included for line level analog devices, along with an RCA MM phono stage input with highly accurate RIAA equalization for a turntable. Additionally, Bluetooth aptX wireless connectivity is built in for convenient streaming.
Additional Features
  • Bass boost EQ
  • TV Connect learns TV remote commands (must be connected via Optical)
  • Full-range 3.5mm preamp output
  • 3.5mm subwoofer output (mono 3.5mm male to RCA female adapter included)
  • Separate headphone amplifier
  • 12V trigger input
Category:
Channels
2.1
Power Output per Channel
2-Channel Driven:
30 W at 8 Ohms / 20 Hz to 20 kHz / 0.1% THD (RMS)
Rear A/V Outputs
1x 1/8″ / 3.5 mm Subwoofer Pre-Out
1x 1/8″ / 3.5 mm Recorder Pre-Out
Speaker I/O
2x Gold-Plated Binding Post Pairs
Wi-Fi
No
Bluetooth
Yes
Amplifier
Amplifier Type
Integrated Amplifier (Preamp/Power Amp Combo)
Channels
2.1
Amplifier Class
Class-D
Power Output per Channel
2-Channel Driven:
30 W at 8 Ohms / 20 Hz to 20 kHz / 0.1% THD (RMS)
Dynamic Power per Channel
60 W at 8 Ohms
100 W at 4 Ohms
150 W at 2 Ohms
Frequency Response
20 Hz to 20 kHz ±0.3 dB (8 Ohms)
THD
< 0.01% (4 Ohms, 8 Ohms, 1 W)
Channel Separation
> 75 dB (1 kHz)
> 70 dB (10 kHz)
Speaker Impedance
2 to 8 Ohms
Tone Control
Bass (80 Hz): ±6.0 dB
Damping Factor
> 300 (8 Ohms)
Audio Processing
Auro 3D Support
No
Supported File Formats
PCM via Optical TOSLINK/Digital Coaxial
Supported Sample Rates
Up to 192 kHz / 24-Bit (PCM)
DAC
192 kHz / 24-Bit
Connectivity
Rear A/V Inputs
1x Stereo RCA Aux
1x Stereo RCA (Phono MM) with Ground Screw
1x Optical TOSLINK
1x Digital Coaxial
Rear A/V Outputs
1x 1/8″ / 3.5 mm Subwoofer Pre-Out
1x 1/8″ / 3.5 mm Recorder Pre-Out
Front I/O
1x 1/8″ / 3.5 mm Headphone Output
Other Rear I/O
1x 1/8″ / 3.5 mm (12 V Trigger) Input
Speaker I/O
2x Gold-Plated Binding Post Pairs
Media Card Slot
No
A/B Speaker Selection
No
Bi-Amp Capability
No
Input Impedance
Line: 56 Kilohms
Input Sensitivity
Line: 113 mV
Phono (MM): 1.15 mV
Max Input Level
Line: > 5.5 Vrms
Phono (MM): > 90 mVrms
Signal to Noise Ratio
Line: > 106 dB (A-Weighted / IHF-A)
Phono (MM): > 76 dB (A-Weighted / IHF-A)
Total Harmonic Distortion (THD)
Line: < 0.01%
Phono (MM) to Line Out: < 0.015%
Channel Separation
Line:
> 80 dB (1 kHz)
> 70 dB (10 kHz)
Wireless Connectivity
Wi-Fi
No
Bluetooth
Yes
Supported Audio Codecs
aptX
DLNA Support
No
Control
Mobile App Compatible
No
Power
Input Power
100 to 240 VAC, 50 / 60 Hz
Power Consumption
Standby: 0.5 W
Physical
Dimensions (W x H x D)
2.3 x 7.3 x 8.6″ / 58.0 x 186.0 x 219.0 mm
Weight
3.1 lb / 1.4 kg
Packaging Info
Package Weight
5.16 lb
Box Dimensions (LxWxH)
13.3 x 11.2 x 3.4″

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “NAD Electronics D 3020 V2 Hybrid Digital DAC Amplifier”

There are no reviews yet.

Related products

Brands Carousel