Dark Light
Marantz PM6007 Stereo 90W Integrated Amplifier
Marantz PM6007 Stereo 90W Integrated Amplifier - Image 2
Marantz PM6007 Stereo 90W Integrated Amplifier - Image 3

Marantz PM6007 Stereo 90W Integrated Amplifier

(1 customer review)
Add to wishlist
Compare

$525.00

Estimated delivery on 3 August - 14 September, 2025
Compare

Items Included

  • Marantz PM6007 Stereo 90W Integrated Amplifier (Black)
  • Remote Control
  • 2 x AAA Batteries
  • Power Cord
  • Limited 3-Year Warranty

 

Key Features
  • 2-Channel Amplifier Configuration
  • 45W per Channel Power Output at 8 Ohms
  • HDAM Technology
  • 4 x Stereo RCA Inputs & 1 x Phono
  • Digital Coaxial, 2 x Optical Inputs
  • 1/4″ Front Headphone Output
  • Gold-Plated RCA Terminals
  • A/B Speaker Outputs
  • Remote Control Included

 

Enjoy enhanced audio quality with your favorite stereo pair of speakers and the black Marantz PM6007 Stereo 90W Integrated Amplifier. It outputs up to 45W per channel at 8 ohms and features a dedicated phono input among its five total stereo RCA inputs. A digital coaxial and two optical inputs are onboard, and the PM6007 employs an AK4490 digital-to-analog converter. The front headphone output allows for private listening.

Current Feedback Amplifier
This technology provides wide-bandwidth and high-speed sound reproduction and, in combination with the high-current power supply, holds a large energy reserve to drive demanding speakers. Thermal compensation helps avoid memory distortion for clean amplification under nearly any circumstances.
Reference Quality D/A Conversion
The PM6007 features Hi-Res D/A conversion. It uses the AK4490 D/A converter, which provides up to 192 kHz / 24-bit resolution for enhanced fidelity with your Hi-Res audio files.
High-Current Power Supply
The power supply supports high-current, high-speed Shottky barrier diodes and high-current storage capacitors fed by a toroidal transformer that work together to provide wide dynamic range and low impedance drive capability.
Toroidal Transformer
Toroidal transformers have several advantages over EI core transformers, including a more efficient design that delivers more power compared to an EI transformer of the same size. Its shape delivers low electromagnetic radiation and mechanical vibration for enhanced sound quality.
HDAM-SA3 Technology
HDAM-SA3 technology replaces standard ICs and consist of discrete surface mount components with short mirror-image L/R signal paths. These HDAMs (Hyper Dynamic Amplifier Modules) do the same thing Op-amps, but are engineered to outperform them in terms of the slew rate and reduced noise for more dynamic, accurate, detailed sound. In the PM6007, the idling current stability of the HDAM-SA3 circuit is less influenced by power transistor temperatures to help maintain sound performance, even at high outputs.
Digital Connectivity with Digital Filter
One digital coaxial and two optical inputs are onboard to connect digital devices and play Hi-Res Audio (up to 192 kHz / 24-bit PCM). The digital section is shielded by an extra metal housing unit to help ensure that the digital stage has no effect on the analog signal. The two-mode digital filter (Filter 1 / Filter 2) allows for optimized reproduction of digital music via the DAC. Filter 1 is a slow roll-off preset that enhances deep stereo imaging, and Filter 2 is a sharp roll-off filter for more precise imaging.
Subwoofer Output
The PM6007 has a subwoofer output with a fixed low-pass cutoff frequency at 150 Hz, so you can enjoy accurate bass with virtually no audible peaks or dips, regardless of your subwoofer’s placement.
Integrated Phono Input
The PM6007 uses a FET (Field-Effect Transistor) in the input stage to help deliver high input impedance, eliminating the need for AC coupling capacitors, simplifying the signal path, and lowering distortion and noise to augment overall signal purity.
Additional Features
  • Copper screws and rigid feet
  • SA3 & SA2 HDAMs
  • Aluminum extrusion heat sink
  • Balance, bass, and treble controls
  • Marantz Musical Digital Filtering
  • Linear drive power supply
  • Linear volume control
  • Source Direct mode
  • Gold-plated RCA terminals
  • D-Bus
  • Auto power off
  • System remote function
Category:
Channels
2.0
Power Output per Channel
45 W at 8 Ohms (RMS)
60 W at 4 Ohms (RMS)
Rear A/V Outputs
1x RCA Subwoofer
1x Stereo RCA
Speaker I/O
4x Binding Post Pair
Wi-Fi
No
Bluetooth
No
Amplifier
Amplifier Type
Integrated Amplifier (Preamp/Power Amp Combo)
Channels
2.0
Power Output per Channel
45 W at 8 Ohms (RMS)
60 W at 4 Ohms (RMS)
Frequency Response
10 Hz to 50 kHz (8 Ohms)
THD
0.008% (20 Hz to 20 kHz, 8 Ohms, Both Channels Driven)
Speaker Impedance
4 to 16 Ohms
Tone Control
Bass (50 Hz): ±10.0 dB
Treble (15 kHz): ±10.0 dB
Damping Factor
100 (8 Ohms, 40 Hz to 20 kHz)
Connectivity
Rear A/V Inputs
4x Stereo RCA
1x Stereo RCA (Phono) with Ground Screw
2x Optical TOSLINK
1x Digital Coaxial
Rear A/V Outputs
1x RCA Subwoofer
1x Stereo RCA
Front I/O
1x 1/4″ / 6.35 mm Headphone Output
Headphone Output Power
50 mW into 32 Ohms
Other Rear I/O
1x RCA (Remote) Input
1x RCA (Remote) Output
1x 1/8″ / 3.5 mm (IR) Input
Speaker I/O
4x Binding Post Pair
Input Impedance
Phono (MM): 47 Kilohms
Line: 20 Kilohms
Input Sensitivity
Phono (MM): 2.2 mV
Line: 200 mV
Max Input Level
Phono: 100 mV
Phono RIAA EQ Deviation
±1 dB (20 Hz to 20 kHz)
Rated Output / Impedance
Subwoofer Pre-Out: 2.8 V /
Signal to Noise Ratio
102 dB
Phono (MM): 83 dB
Line, Network: 102 dB (2 V Input)
Wireless Connectivity
Wi-Fi
No
Bluetooth
No
Power
Input Power
120 VAC, 60 Hz
Power Consumption
Active: 155 W
Standby: 0.3 W
Physical
Dimensions (W x H x D)
17.3 x 4.1 x 14.5″ / 43.9 x 10.4 x 36.8 cm
Weight
16.7 lb / 7.6 kg
Packaging Info
Package Weight
22.6 lb
Box Dimensions (LxWxH)
20 x 18.8 x 7″

Based on 1 review

5.0 overall
1
0
0
0
0

Add a review

  1. Mark –

    When I first connected my CD6005 and Klipsch Fortes to this amp I almost put it right back in the box to return. The sound was heavily veiled and compressed, like the speakers were in a box. I put a CD on repeat for a day and came back and it was sounding better. Put another CD on and came back a day later and it was better still. Tuned the radio to noise and left it for another day and it sounded better still. I think it needs about 3 solid days of burn-in for the capacitors to work properly. People debate this but it was clear in this case. And I wasn’t listening to it and getting used to it during this process. My system had been a Conrad-Johnson PV-5 into an older Marantz power amp, and initially the difference was night and day. On the fourth day I invited my 30-something son to help me do blind A/B testing and neither of us preferred one system over the other and in fact they were quite similar. SO, I kept it and sold the CJ.

    Mark –

Related products

Brands Carousel