Dark Light
Audio-Technica Consumer AT-LPA2 Manual Two-Speed Turntable
Audio-Technica Consumer AT-LPA2 Manual Two-Speed Turntable - Image 2
Audio-Technica Consumer AT-LPA2 Manual Two-Speed Turntable - Image 3
Audio-Technica Consumer AT-LPA2 Manual Two-Speed Turntable - Image 4
Audio-Technica Consumer AT-LPA2 Manual Two-Speed Turntable - Image 5
Audio-Technica Consumer AT-LPA2 Manual Two-Speed Turntable - Image 6
Audio-Technica Consumer AT-LPA2 Manual Two-Speed Turntable - Image 7
Audio-Technica Consumer AT-LPA2 Manual Two-Speed Turntable - Image 8

Audio-Technica Consumer AT-LPA2 Manual Two-Speed Turntable

Add to wishlist
Compare

$1,400.00

Estimated delivery on 3 August - 14 September, 2025
Compare

Items Included

  • Audio-Technica Consumer AT-LPA2 Manual Two-Speed Turntable
  • Control Box
  • Dust Cover with Hinges
  • Platter
  • Drive Belt
  • Light Counterweight
  • Heavy Counterweight
  • Anti-Skate Weight
  • Anti-Skate Auxiliary Weight
  • Headshell with MC Stereo Cartridge (AT-OC9XEN)
  • 45 rpm Adapter
  • RCA Stereo Cable (3.6′)
  • Power Cable (5.9′)
  • Control Cable (3.3′)
  • Ground Cable (3.6′)
  • Tonearm Hex Wrench
  • Pair of White Inspection Gloves
  • Limited 2-Year Manufacturer Warranty
Key Features
  • Plays 33 1/3 & 45 rpm Vinyl Records
  • Fully Manual Operation
  • External Motor/Power Control Box
  • Clear Acrylic Plinth & Platter
  • MC Cartridge with Elliptical Nude Stylus
  • Optical Sensor Monitors Rotation Speed
  • Belt-Driven Motor
  • Machined Aluminum Headshell
  • Carbon Fiber Tonearm with Anti-Skate
  • Heavy-Duty Height-Adjustable Feet
Vinyl fans have a clear choice for pure analog audio with minimal distortion in the AT-LPA2 Manual Two-Speed Turntable from Audio-Technica. It starts with the physical design of the AT-LPA2, with its completely transparent, 1.2″-thick high-density acrylic plinth and 0.8″-thick platter. They improve vibration dampening by being at a similar resonant frequency to that of a record. Electrical interference is drastically reduced by moving the belt-drive motor control and power out of the plinth to an external control box. An optical sensor keeps the platter spinning at a consistent 33 1/3 or 45 rpm speed. To further ensure high-fidelity playback, AT-LPA2 is equipped with a carbon-fiber tonearm with an aluminum headshell and AT-OC9XEN MC cartridge with elliptical nude stylus.
Outside Control
Audio-Technica have taken great steps to minimize external interference from disturbing your vinyl listening. One of the most significant is the external control box of the AT-LPA2. The motor controls and power supply are within the box, mitigating any electrical interference. The buttons are clearly labeled and easily operated. Simply press the power button, your desired speed button, and the start/stop button. An optical sensor positioned under the spindle monitors rotation to ensure it is a consistent 33 1/3 or 45 rpms.
Accurate Tracking
The AT-LPA2 is equipped with an AT-OC9XEN moving coil cartridge, which has a lower mass when compared to other MM-based cartridges. This lets the stylus react quickly within the record’s groove to accommodate changes in dynamic music passages for high-fidelity playback. Also, a string-type anti-skate mechanism is employed to prevent side-to-side skipping.
Additional Details
  • Elliptical nude stylus (0.3 x 0.7 mil) with high-purity PCOCC coils
  • Add different optional cartridges with included 110 and 130 g counterweights
  • Heavy-duty, height-adjustable feet for further vibration isolation
  • Removable hinged dust cover included
  • Stereo RCA phono output with ground screw (please note that there is no amplification and the AT-OC9XEN MC cartridge outputs at only 0.35mV. A dedicated MC-compatible preamp or MM preamp coupled with a step-up transformer (SUT) is required for playback)
Category:
General
Turntable
General

Motor: DC Servo
Driving Method: Belt
Speeds: 33 1/3 and 45 rpm
Wow and Flutter: <0.12% WRM (33 rpm)
Signal-to-Noise Ratio: > 60 dB

Tonearm

Type: Static Balanced Straight Carbon Fiber
Effective Length: 8.8″ / 223.6 mm
Overhang: 0.7″ / 18.6 mm
Maximum Tracking Error Angle: Less Than 2°
Stylus Pressure Adjustement Range: 0 to 3 g
Applicable Cartridge Weight Range (Excluding Headshell, Light Counterweight): 6.1 to 9.2 g
Applicable Cartridge Weight Range (Excluding Headshell, Heavy Counterweight): 9.2 to 13.9 g
Height Adjustment Range: -0.06 to 0.28″ / -1.5 mm to +7 mm (With Included Cartridge)
Anti-Skate Adjustment Range: Equivalent to 1.3 to 3 g Stylus Pressure
Cartridge
Recommended Load Resistance: >/= 100 Ohms (When Head Amplifier Connected)
Frequency Response: 20 Hz to 30 kHz
Output Voltage: 0.35 mV (1 kHz, 5 cm/sec.)
Stylus: 0.3 x 0.7 mil Elliptical Nude
Cantilever: Aluminum Pipe
Tracking Force Range: 1.8 to 2.2 g (2.0 g Standard)
Headshell Overhand Adjustment Range: -2.5 to 2.5 mm (When Using AT-OC9XEN)
Inputs/Outputs
Audio I/O
1x RCA Output
Power
Power Source
AC Input (Included)
AC Input Power
100 to 240 VAC, 50 / 60 Hz
Power Consumption
6 W
Physical
Color
Clear
Material of Construction
Acrylic, Aluminum, Carbon Fiber
Dimensions
16.5 x 13.4 x 5.3″ / 420 x 340 x 135 mm (Turntable Body)
9 x 5.2 x 2″ / 228 x 133 x 50 mm (Control Box)
1.2″ / 30 mm (Plinth Thickness)
0.8″ / 20 mm (Platter Thickness)
Weight
18.5 lb / 8.4 kg (Turntable Body)
2.4 lb / 1.1 kg (Control Box)
0.3 oz / 7.6 g (Cartridge)
0.4 oz / 11 g (Headshell Including Lead Wires)
0.4 oz / 10.2 g (Headshell Excluding Lead Wires)
Packaging Info
Package Weight
27.97 lb
Box Dimensions (LxWxH)
22.6 x 17.5 x 8.9″

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Audio-Technica Consumer AT-LPA2 Manual Two-Speed Turntable”

There are no reviews yet.

Related products

Brands Carousel