Dark Light

NAD Electronics C 700 V2 BluOs Streaming Amplifier


$1,399.00

Estimated delivery on 3 August - 14 September, 2025
Compare

Items Included

  • NAD Electronics C 700 V2 BluOs Streaming Amplifier
  • Power Cable
  • Remote Control with Batteries
  • Limited 2-Year Manufacturer Warranty (Parts and Labor)
Key Features
  • 2.1-Channel Amplifier Configuration
  • 80W per Channel HybridDigital UcD Amp
  • 5″ High-Definition Color Display
  • BluOS Streaming with Wi-Fi 5
  • High-Resolution Audio to 24-bit/192 kHz
  • RCA, Optical, Coaxial & HDMI eARC Inputs
  • RCA Phono MM Input with Ground
  • Two-Way aptX HD Bluetooth
  • USB-A Plays Music from External Drive
  • Works with 3rd Party Home Automation

Supply your favorite speakers with clean, high-quality amplification and access to your high-resolution digital, streaming, and analog music sources with the NAD Electronics C 700 V2 BluOs Streaming Amplifier. Building on the just-add-speakers philosophy of the C 700, the V2 adds a MM phono stage input and upgraded DAC as well as support for Dirac Live room correction (sold separately).

HybridDigital UcD Amplifier
Through its HybridDigital UcD output stage, the C 700 V2 can deliver 80 watts per channel of continuous power and 120 watts per channel of instantaneous power at 8 ohms, making it compatible with a wide range of passive stereo speakers. NAD’s highly efficient amplifier design is renowned for ultralow noise and distortion through the entire audio band, regardless of the loudspeaker load.
Built-in High-Resolution Streaming Music
The C 700 V2 comes equipped with Wi-Fi and Ethernet inputs to enable the embedded streaming player based on BluOs software. Once connected to your network, you can use the BluOs controller app to play music from dozens of streaming and web radio services, including Amazon Music Ultra HD, Tidal, Qobuz, Deezer, and Idagio. Like all BluOS-enabled components, the C 700 V2 supports high-resolution audio to 24-bit/192kHz, and has full MQA decoding and rendering capability.
Well Connected
To play a variety of sources the C 700 V2 has an RCA line in, HDMI eARC, Optical, and coaxial digital inputs as well as a USB-A port for connecting an external drive. This model also has a phono level input with ground connector for turntables with Moving Magnet (MM) cartridges. 

There are five-way binding posts for wiring to passive speakers, and an RCA output for connecting an active subwoofer. Settings, including crossover options, can be adjusted in the BluOS app. Additionally, with BluOS wireless connectivity, you can add two BluOs wireless speakers in the back of the room to create 4.1-channel Dolby surround sound.

Smart Home Compatible
NAD offers software tools that allow smart home specialists to integrate the C 700 V2 into home-automation systems. This allows control of music playback, along with other home systems like lighting, shades, HVAC, and security. Integrate with control systems via Ethernet, IR, and 12V trigger control. Drivers are available for Control4, Crestron, Elan, RTI, and others.
Additional Features
  • Solid aluminum body and glass front panel
  • 5″ high-definition color screen displays album art, track progress, and system settings
  • Adjust settings with control knob and navigation buttons or the included remote control
  • Support for Spotify Connect, Tidal Connect, and Apple AirPlay 2
  • Works with Amazon Alexa and Apple Siri voice control
  • ESS Sabre ES9028 DAC
  • Support for Dirac Live room calibration (microphone and license sold separately)
  • Two-way aptX HD Bluetooth
  • BluOs supports streaming up to 63 zones
Category:
Channels
2.1
Power Output per Channel
2-Channel Driven:
80 W at 8 Ohms / 20 Hz to 20 kHz / 0.04% THD (RMS)
Dolby Compatibility
Dolby Digital
Rear A/V Outputs
1x Stereo RCA Pre-Out
1x RCA Subwoofer Pre-Out
Speaker I/O
2x Gold-Plated Binding Post Pair
Wi-Fi
Wi-Fi 5 (802.11ac)  
Bluetooth
Yes
Amplifier
Amplifier Type
Integrated Amplifier (Preamp/Power Amp Combo)
Channels
2.1
Amplifier Class
Class-D
Power Output per Channel
2-Channel Driven:
80 W at 8 Ohms / 20 Hz to 20 kHz / 0.04% THD (RMS)
Dynamic Power per Channel
100 W at 8 Ohms
125 W at 4 Ohms
Frequency Response
20 Hz to 20 kHz ±0.18 dB
THD+N
< 0.04% (20 Hz to 20 kHz, Both Channels Driven)
THD
< 0.05% (20 Hz to 20 kHz)
Channel Separation
> 93 dB into 8 Ohms (1 kHz)
> 72 dB into 8 Ohms (10 kHz)
Speaker Impedance
4 to 8 Ohms
Tone Control
Treble (20 kHz): ±6.0 dB
Bass (60 Hz): ±6.0 dB
Damping Factor
> 90 (8 Ohms, 20 Hz to 20 kHz)
Audio Processing
Dolby Compatibility
Dolby Digital
Auro 3D Support
No
Supported File Formats
AAC, AIFF, ALAC, FLAC, MP3, MQA, PCM, WAV, WMA, WMA-L via USB/Network/Optical TOSLINK/Digital Coaxial
Supported Sample Rates
Up to 192 kHz / 24-Bit (AAC, AIFF, ALAC, FLAC, MP3, OGG, PCM, WAV, WMA)
DAC
192 kHz / 24-Bit (ESS Sabre ES-9028)
Connectivity
Rear A/V Inputs
1x Stereo RCA
1x Stereo RCA (Phono MM) with Ground Screw
1x Digital Coaxial
1x Optical TOSLINK
1x HDMI
1x USB-A
Rear A/V Outputs
1x Stereo RCA Pre-Out
1x RCA Subwoofer Pre-Out
Front I/O
No
Other Rear I/O
1x RJ45 (Gigabit Ethernet) Input
1x 1/8″ / 3.5 mm (12 V Trigger) Output
1x 1/8″ / 3.5 mm (IR) Input
1x 1/8″ / 3.5 mm (Service) Input/Output
1x Micro-USB (Service) Input/Output
Speaker I/O
2x Gold-Plated Binding Post Pair
HDCP Support
Yes
Audio Return Channel (ARC)
eARC
HDMI CEC
Yes
Media Card Slot
No
A/B Speaker Selection
No
Bi-Amp Capability
No
Input Sensitivity
Line: 550 mV
Phono RIAA EQ Deviation
±0.3 dB (20 Hz to 20 kHz)
Rated Output / Impedance
Subwoofer: 4 Vrms / 600 Ohms
Signal to Noise Ratio
Amplifier Out: > 87 dB (1 W Output / 8 Ohms / A-Weighted)
Phono (MM): > 81 dB (A-Weighted)
Total Harmonic Distortion (THD)
Phono (MM) to Line Out: < 0.5% (2 V Input)
Wireless Connectivity
Wi-Fi
Wi-Fi 5 (802.11ac)  
Bluetooth
Yes
Supported Audio Codecs
AAC, aptX, aptX HD
Wireless Audio Protocols
AirPlay 2, Roon Ready, Spotify Connect, Wi-Fi Direct
DLNA Support
No
Control
External Control Support
Android/iOS Control App, Control4, Crestron Command, ELAN, RTI
Virtual Assistant
Apple AirPlay, Works with Alexa, Siri
Mobile App Compatible
Yes: Android & iOS
App Name: BluOS Controller
Power
Input Power
100 to 240 VAC, 50 / 60 Hz
Power Consumption
Network Standby: 3 W
Physical
Dimensions (W x H x D)
8.6 x 3.8 x 10.5″ / 218.0 x 96.0 x 266.0 mm
Weight
10.6 lb / 4.8 kg
Packaging Info
Package Weight
10.22 lb
Box Dimensions (LxWxH)
13.5 x 12.6 x 8.8″

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “NAD Electronics C 700 V2 BluOs Streaming Amplifier”

There are no reviews yet.